BlackVue Power Magic Pro is a hardwiring kit that supplies continuous power to your dash cam for parking mode while stopping your car battery from draining too low.

The BlackVue Power Magic Pro is a hardwiring kit that supplies continuous power to your dash cam for parking mode while stopping your car battery from draining too low. [1, 2]

How It Works

Parking Mode: It keeps your dash cam turned on even when your car engine is off. [1]
Battery Protection: It monitors your car battery level. [1]
Power Cutoff: It cuts power to the camera if the battery voltage drops too low or a set timer ends. This ensures your car will start again. [1, 2]

Main Wires

The unit has three wires you must connect to your car: [1]

BAT (Yellow/Red): Connects to a constant fuse that always has power.
ACC (Red): Connects to an ignition-switched fuse that only has power when the car is running.
Ground (Black): Connects to a metal bolt on the car frame. [1, 2, 3]

Watch this guide to see the step-by-step wiring process for the device:

2:39

BlackVue Power Magic Pro – Installation Guide

121K views · 10 years ago

YouTube · BLACKVUE

Settings and Adjustments

Voltage Switch: You can set the cutoff voltage to levels like 12.0V or 12.5V for regular 12V vehicles. [1]
Timer Switch: You can set a timer from a few hours up to infinity so the camera turns off automatically. [1]
Power Switch: A physical switch lets you turn parking mode on or off manually. [1, 2]

If you need help, tell me: